Important Installation
Instructions
In order to receive CCN programming
the receivers must be programmed to receive the CCN
channel. Your installer should have set this up during
the installation process. You can verify that
your receiver is working by turning your ADTH receiver
to channel 3 or 14. If your system is properly set
up you will see a CCN logo animation and hear music
on channel 3 of your ADTH receiver. If the
CCN logo animation is visible on channel 14 please
follow the instructions in section 2 below.
If you are unable to see the CCN logo, please follow
these instructions beginning in section 1.
Section 1
Programming Channel reception:
Keystrokes |
Screen
Displays |
Press “Menu” Button
on remote control |
Main Menu |
Using and buttons,
highlight Installation and then press “OK” button |
Installation
Menu |
Using and buttons,
highlight “Service Searching” and
then press “OK” button |
Service
Searching Menu |
Using and buttons,
highlight “Manual Searching” and
then press “OK” button |
Manual
Searching |
Do not
change any of the settings on this
screen. Press the “OK” button. |
APPEND? Yes No |
Use the button
and highlight “Yes” then
press “OK” |
Saving
Data Please wait |
Press the “Menu” key
three times to exitfrom
menus |
Current
Video from ‘Melli TV’ on
Channel 1. |
Press the button |
CCN Animated
Logo |
Congratulations! You are now
set up to receive CCN.
Section 2
In order to keep your channels
consistent with all other Receivers in the CCN
network, Please edit your channel list as follows
Press “Menu” Button
on remote control |
Main Menu |
Using and buttons,
highlight Installation and then press “OK” button |
Installation
Menu |
Using and buttons,
highlight “Service Organising” and
then press “OK” button. |
SERVICE
ORGANISING |
Using and buttons,
highlight “Organising TV” and
then press “OK” button. |
Organising
TV |
Using and buttons,
highlight “Delete” and
then press “OK” button. |
Delete
TV Program |
Using and buttons,
highlight “Melli TV” and
then press “OK” button
twice |
Delete
Yes No |
Use the button
and highlight “Yes” then
press “OK” |
Melli TV
is deleted from the list of channels. |
Continue the last
two steps until all channels except “Back
to Hl” “BusinessTV” and “CCN” have
been deleted. |
(Channel
List)
1 Back to Hl (Back to Health
Channel) (The back to
Health Channel is normally encrypted.
This channel may be used occasionally
in the future to view some CCN
special events.)
2 Business TV
3 CCN
|
Press the “Menu” key
five times to exit from menus |
Current
Video from ‘Melli TV’ on
Channel 1. |
Press the button
until 3 CCN is displayed
then “OK” |
CCN Animated
Logo |
Your system is now set up to
receive the CCN Network. If you make a mistake
in editing the channel list, don’t worry.
Just start at section 1 again. This will reload
your channels.
If you get a display on the CCN Channel
that indicates “e16 the service is currently
scrambled”, please call 1-866-211-0690
for authorization.